Since a machine has to be stopped during testing,detecting the breading point of drill bit in rolling is generally difficult work.However,because of the non-contact testing,the Eddy Current Drill Bit Breakage Detector enables testing of drill bit without stopping your machine. It also has a future as a significantly longer-lasting detector.
Having no influence of oil and water, it enables to operate even in a harsh
It enables to see the time to change drill bit by this technology
Changes in defects of drill bit like breaking edge will alter the amplitude
and pattern of the eddy current. By comparing this change with appropriate
reference standard value, the Eddy Current Drill Bit Breakage Detector
will detect any defects of the test drill bit.
φ10mm×L40mm Cable ：5m Available to adjust as customer needs
POWER OK /NG (Measurement value problem)
4 Digits Display
Used for numerical value and adjustment
Input judgement standard value⇒Check ⇒Switch to measurement
LED Bar Graph Display
Display measurement value
Monitor for detecting
Input command to start measurement
Output timing A(arbeit) point of contact
Output timing B (break) point of contact
24V / GND １ each
24V （0.9 more）
× 140mm × 160mm
The sensor prove can be customized to meet customer requirement.
Please refer willingly.
Our sales person will get back to you.
All Rights Reserved,
Copyright (C) Micro-Fix Co.,Ltd.